Metal roof replacement, built to last.
Standing seam or exposed fastener metal, installed to hold up to DFW Metro hail and wind for decades. We handle the full replacement, from the eaves to the ridge.
Absolute Professional Roofing Contractors installs full metal roof replacements across the DFW Metro, covering Plano, McKinney, Allen, and the surrounding towns. A metal replacement covers either standing seam panels with hidden fasteners or exposed fastener panels, along with everything that changes underneath: the underlayment, the eave and rake details, and the flashing at every penetration. We've worked in the DFW Metro since 2009 and hold TX roofing license #80001716.
Is metal the right call for your home instead of another shingle roof?
It usually comes down to how the current roof has performed through Texas storms and how long you plan to stay in the home. Homeowners who've replaced shingles more than once after hail, or who are tired of granule loss and curling every decade, often move to metal because the panels shed hail and wind differently than an asphalt mat. It's not the right fit for every budget or every roofline, so the honest answer comes from looking at your specific roof, not a blanket recommendation.
Signs it's time to consider a metal replacement
Repeated hail damage on the current roof
A shingle roof that's taken multiple rounds of hail bruising and granule loss ages faster with every storm. Metal panels handle hail impact differently and don't shed granules the way asphalt does.
Wind-lifted or torn shingles on a recurring basis
If wind keeps getting under the shingle edges and tearing them loose, especially on an exposed roofline, a fastened metal system holds up differently in sustained wind.
A roofline near the end of its shingle life
When a shingle roof is already due for replacement, that's the natural point to weigh a longer-term metal system instead of another asphalt cycle.
Rising cooling costs from a hot attic
Reflective metal panels can cut down on radiant heat gain compared to dark asphalt, which matters through a Texas summer.
What we look at before recommending metal
The existing decking and structure
Metal panels are lighter than tile but still need sound decking underneath, so we check the deck condition before quoting the job.
Roof pitch and panel style
Standing seam and exposed fastener systems behave differently at low slopes versus steep pitches, which affects which system fits your roof.
Penetrations and transitions
Vents, chimneys, and wall transitions all get flashed differently in metal than in shingle, so every penetration on the roof gets planned before install.
Structural sag or soft spots
A roofline that's already sagging needs the framing addressed as part of the job, not covered up under new panels.
What to expect during the visit
We tear off the old roofing down to the decking, check every board for soft spots or rot, and replace anything that won't hold fasteners properly. New underlayment goes down, and we detail the eaves, ridge, and every penetration to work with a metal system instead of shingles. Panels go on to manufacturer specification, whether that's standing seam or exposed fastener, and we finish out the trim and flashing before cleaning the site and walking the finished roof with you.
Related services you may need
If your current roof took storm damage that's pushing you toward a metal replacement, our Storm & Hail Restoration team can document that and help with the insurance side. Once the new roof is on, it's worth reviewing Ventilation & Energy Efficiency and making sure your Gutters are set up to work with the new roof edge.
The cost of waiting
A shingle roof that's already showing repeated storm damage doesn't get more durable by waiting, it just accumulates more repairs between now and the eventual replacement. Every hail event or high-wind day chips away at what's left of the roof's service life, and each round of patchwork repair adds up without changing the underlying material. If metal is the long-term answer for your home, deciding sooner means fewer repair bills between now and then.
How long does a metal roof replacement take?
Timing depends on the panel style, the roof's complexity, and how much decking work is needed once the old roofing comes off. A simple gable roof with straightforward panels moves differently than a roof with multiple valleys, dormers, and transitions, so we give a real timeline after inspecting your roof.
Is metal roofing worth it over another shingle roof?
It depends on how your current roof has performed and how long you plan to own the home. Homeowners who've dealt with repeated storm damage or want a longer-term roof system tend to see the most value in metal, while a home with a straightforward roofline and no history of storm trouble may do just as well with another asphalt shingle roof.
What drives the cost of a metal roof replacement up or down?
Panel style is the biggest factor, since standing seam and exposed fastener systems price differently, along with roof complexity, decking condition, and how many penetrations and transitions need custom flashing. We walk through all of that with you during the inspection before quoting the job.
Call us for a free inspection to talk through whether a metal replacement fits your roof and your plans. We serve homeowners across the DFW Metro and give an honest read before recommending anything.
- Full roof replacements built for Texas heat, hail, and high winds, installed to manufacturer specifications with quality materials.